Pneumatic Conveying Systems
Design, Selection & Troubleshooting with Particular Reference to pulverised Fuel Ash
David Mills and V K Agarwal
Cite this publication as
David Mills, V K Agarwal, Pneumatic Conveying Systems (2009), Vogel Communications Group, Würzburg, ISBN: 9783834360731
129
accesses
accesses
Description / Abstract
The critical design parameter in any pneumatic conveying system is the conveying line inlet air velocity. With different grades of the same material care must be exercised in design and specification of the plant and components. Emphasis is given to system design and system operation and so problems are considered in two ways. For a new system the conveying variables are highlighted so that they should be taken into account in the system analysis an design process. For existing systems chapters are devoted specifically to troubleshooting. Numerous equations can be used to check operating parameters.
Table of content
- BEGINN
- Title
- Copyright
- FOREWORD
- CHAPTER 1 INTRODUCTION
- CONTENTS
- BACKGROUND
- CHAPTER 2 REVIEW OF SYSTEMS
- CONTENTS
- CHAPTER 3 FEEDING DEVICES
- CONTENTS
- CHAPTER 4 SYSTEM COMPONENTS
- CONTENTS
- CHAPTER 5 PIPELINE MODELS
- CONTENTS
- CHAPTER 6 AIR ONLY MODELS
- CONTENTS
- CHAPTER 7 CONVEYING CAPABILITY
- CONTENTS
- CHAPTER 8 SCALING PARAMETERS
- CONTENTS
- CHAPTER 9 DESIGN CASE STUDY PART I
- CONTENTS
- CHAPTER 10 DESIGN CASE STUDY PART II
- CONTENTS
- CHAPTER 11 FIRST APPROXIMATION DESIGN METHODS
- CONTENTS
- CHAPTER 12 TROUBLESHOOTING PART I
- CONTENTS
- CHAPTER 13 TROUBLESHOOTING PART II
- CONTENTS
- CHAPTER 14 FLY ASH DATA
- CONTENTS
- NOMENCLATURE
- INDEX