Transfer path analysis based on in-situ measurements for automotive applications
Bernd Philippen
Diese Publikation zitieren
Bernd Philippen, Transfer path analysis based on in-situ measurements for automotive applications (2017), Logos Verlag, Berlin, ISBN: 9783832593100
23
Accesses
Accesses
Beschreibung / Abstract
Transfer path analysis and synthesis (TPA/TPS) is a widely used approach in the development process of a vehicle which models the transmission from sound sources to a receiver location to identify sources and dominant transfer paths of unwanted noise components. The objectives of this thesis are in-situ transfer path analysis methods for automotive applications which cover the main sources of the driving noise: Powertrain, tire-road contact and wind flow. Different applications require different methods.
The first part contains a TPA method for structure-borne sound induced via elastic elements with an improved prediction quality and which delivers more insight into the transmission behavior. A new approach is presented which determines mount characteristics in-situ from operational data considering the crosstalk on the car body. The effective mount transfer functions are an ideal starting point to estimate parameters of mount models. Physically motivated parameter models with only a few parameters are used to avoid overfitting and, therefore, meaningless values.
In the last few decades engine noise has been reduced continuously, so that the noise generated from rolling tires attracts more and more attention. Further improvements to tire-road noise analysis using on-road measurements are presented. A new approach for the auralization of tire-road interior noise under dynamic driving conditions with a running engine is proposed. This makes it possible to now study the influence of different load and drive torque on the tire-road noise during a run-up.
The first part contains a TPA method for structure-borne sound induced via elastic elements with an improved prediction quality and which delivers more insight into the transmission behavior. A new approach is presented which determines mount characteristics in-situ from operational data considering the crosstalk on the car body. The effective mount transfer functions are an ideal starting point to estimate parameters of mount models. Physically motivated parameter models with only a few parameters are used to avoid overfitting and, therefore, meaningless values.
In the last few decades engine noise has been reduced continuously, so that the noise generated from rolling tires attracts more and more attention. Further improvements to tire-road noise analysis using on-road measurements are presented. A new approach for the auralization of tire-road interior noise under dynamic driving conditions with a running engine is proposed. This makes it possible to now study the influence of different load and drive torque on the tire-road noise during a run-up.
Inhaltsverzeichnis
- BEGINN
- 1 Introduction
- 1.1 Sound sources in a vehicle
- 1.2 Sound engineering methods
- 1.3 Transfer path analysis and synthesis
- 1.4 Panel contribution analysis
- 1.5 Objectives
- 2 Fundamentals of transfer path analysis
- 2.1 Structure-borne sound transfer path analysis
- 2.2 Auralization using acoustic transfer functions
- 2.3 Direct force measurement
- 2.4 Inverse force method based on mobility FRFs
- 2.5 Two-port model
- 2.6 Mount stiffness method
- 2.7 Mount attenuation function method
- 2.8 Transmissibility method - Operational transfer path analysis
- 2.9 Model based approaches
- 2.10 Discussion
- 3 Engine TPA - Parameterizing mount models based on in-situ measurements
- 3.1 Effective mount transfer function method
- 3.2 Physically motivated parameter models
- 3.3 Physically motivated models considering directional coupling within a mount
- 3.4 Modeling of non-linear mounts
- 3.5 Avoiding auralization artifacts
- 3.6 Transfer path synthesis based on engine test rig data
- 4 Results of engine TPA methods
- 4.1 Effective mount transfer function method
- 4.2 Parametric mount models
- 4.3 Transfer path synthesis based on engine test rig data
- 4.4 Summary on engine TPA
- 5 Chassis TPA - Tire-road noise analysis
- 5.1 Auralization of tire-road noise
- 5.2 Data acquisition
- 5.3 Analysis of coast-down measurements
- 5.4 Tire-road noise under dynamic driving conditions
- 6 Results of chassis TPA methods
- 6.1 Sound shares of the tire-road noise
- 6.2 Comparison of OTPA and conventional chassis TPA
- 6.3 Comparison of direct force measurement with indirect force determination
- 7 Conclusions and outlook
- Nomenclature
- Bibliography